How Much Do Concrete Counter Tops Cost?

Common Range: $80 – $155 / Square Foot, Installed

National Average: $117 Per Sq Ft

Updated: November 17, 2023. Written by: Steve Hansen

To ensure we provide the most precise and current cost estimates to you, we compile costs from industry data, licensed contractors, our users completed projects, and home improvement industry experts. We may earn commission from our partners when you utilize the services through our website. Our editorial integrity and quality remains our top priority, and recommendations do not affect our opinion or evaluations. Learn more about us and our editorial process, and read our advertiser disclosures.

Cost Range for Concrete Counter Tops

The cost range for concrete counter tops is between $80 to $155 per square foot, installed, similar to the cost of granite countertops and a little more than quartz countertops. This cost range is wide due to many variables that you’ll need to decide on before forming and pouring the concrete into the molds. Those cost factors are outlined below.

Once you’ve hired a contractor to handle the concrete counter top installation, they’ll measure the area carefully and prepare all surfaces that will have the countertop added. Once ready, forms will be built to the correct size and depth and all edges sealed to prevent seepage. After the forms are in place, wire mesh and/or rebar may be used to strengthen the counter tops once they are completed.

Once the forms and all prep work is completed, the concrete will be mixed to your desired color and poured into the forms eliminating all air pockets and bubbles, while assuring the rebar and mesh are properly located in the center mass of the counter. After the concrete counter top hardens, the forms will be removed, the surface polished, finished and eventually sealed.

Average Costs

Average Do It Yourself cost
$15 – $27 / Square Foot
Average Contractor Installed Cost
$117 / Square Foot
Typical Cost Range
$80 – $155 / Sqft Installed

stained concrete counter tops in new kitchen

Free Concrete Counter Top Cost Quotes

Free Concrete Counter Top Cost Quotes

Overview of Concrete Counter Tops

Concrete is the most versatile bathroom and kitchen countertop material available because of the unlimited possibilities for creating custom designs. This makes its price range wider too. Techniques have been developed to create concrete counters that look like granite, marble, wood, a flowing stream and much more.

Stone, tile, glass or shells can be embedded in bath or kitchen counters for visual appeal. The material can be stamped, etched and textured, tinted and acid stained.

This guide to cost of concrete counter tops explains how design elements affect cost. Materials, supplies and labor costs are itemized. There are FAQs and links to many related projects like adding a tile backsplash to your kitchen remodel. Prices gathered from around the web and submitted by readers provide a complete picture.

Concrete Counter Top Cost Factors

Single-slab counters with minimal treatment cost the least. Large, multi-slap projects with several enhancements to the concrete cost the most. The more customized your kitchen or bath counters are, the more they will cost.

  • Concrete Thickness: The standard thickness is 1.5 inches. Large slabs are often cast 2 inches thick for stability. The appearance of thicker counters can be achieved by raising the slab and adding a 4” to 6” front piece.
  • Number of Slabs: Using multiple slabs means joining the seams and often requires additional time to adjust the fit in corners. Those tasks add cost.
  • Slab Size: Large countertop, bar top and island top slabs require 3 or 4 sets of hands when cast off-site, so labor costs go up.
  • Concrete Treatment: There are too many options to list. Common ones are tinting, stamping, staining/etching, polishing, press forming and tinted to produce a wood look. These are the lowest cost options. Texturing methods and embedding aggregate, tile or shells cost a lot more. Grinding away the top layer of concrete to expose the aggregate within is possible too, as is using a router to add a stylish edge. Each of these options requires more labor, thus is a higher cost.
  • Casting Extras: Fabricating unusual shapes for an island or peninsula, casting a drainboard or trivet or concrete backsplash or sink raise the price.
  • Availability: If you have to go outside your local area to find an experienced concrete countertop contractor, cost will go up due to travel costs.
  • What Else You’re Doing: If you hire a bathroom contractor for additional projects like shower or tub replacement or installing tile on the bathroom floor, you’ll save a little on the overall total.
  • Cost of Living: Like everything else, countertop cost is higher on the Coasts and in major cities than elsewhere.

Based on the factors for concrete counter costs given above, here are rough estimate prices for common projects:

  • Average bathroom countertops: $720 to $1,320
  • Average kitchen countertops: $1,925 to $4,375
  • Kitchen countertops with island: $2,750 to $6,250
Free Concrete Counter Top Cost Quotes

Free Concrete Counter Top Cost Quotes

Cost of Concrete, Forms and Installation Supplies

Here’s an itemized list of supplies for the rare homeowner that fabricates concrete countertops. Even if you hire a pro, this list shows where the money goes.

  • $25-$32 per 80lb bag | Concrete countertop mix. One bag is needed for each 4.8 square feet for 1.5-inch counters and 3.5 square feet of 2-inch slabs.
  • $6-$12 per bottle | Tint. The amount needed depends on how dark you want the color. Expect to use 2-3 bottles for a bathroom counter and up to 10 in a kitchen.
  • $12-$20 per 8oz bottle | Acid stain. Each 8oz bottle covers approx. 25 square feet.
  • $15-$30 | Plastic or wood and fasteners to create the forms.
  • $12-$24 | Trowel for finishing the surface.
  • $30-$60 rental, $200+ purchase | Concrete grinder and pads to create an exposed aggregate surface. Cost is similar for a concrete polisher and supplies.
  • $20-$30 per quart | Food-safe concrete sealer.
  • $25-$200 | Miscellaneous supplies including stain applicators, a concrete stamp, tile or stone to embed, dust mask and goggles.

Permits, Inspection, Related Costs and Installation Time

Permits and Inspection Cost

  • $0 | No permit is required for this work.

Related Costs and Installation Time

The costs shown in the table at the top include the labor required to fabricate and install the counters. Here are the cost broken down.

  • $30 – $50 per square foot | Fabrication and installation labor costs for basic concrete slabs.
  • $50 – $115 per sink opening | One bathroom or kitchen sink opening is typically included in the estimated cost. Forming additional openings for a second sink cost more.
  • $55 – $90 per hour | Additional labor cost for staining, stamping, routing an edge, polishing a sink opening edge, fabricating integrated forms like a drainboard or embedding tile or shells.
  • $100 – $200 | Finishing and polishing sink opening edge for an undermount sink.
  • $85 – $235 | Optional removal and disposal of an existing countertop.

Countertop Install Time Schedule

Concrete countertops can be fabricated in a shop and brought to your home for installation, or the entire job can be done at your home.

Cast-in-place concrete counters produce a perfect fit and avoid possible damage to the slabs being trucked from a shop. Seams can be avoided too.

The obvious disadvantages are having your kitchen a mess for several days for initial pouring and again later if it is stained, routed or ground. And adding seams or joints to large runs of concrete can help reduce the risk of the concrete cracking in the future.

Slabs cast in a shop, or pre-cast concrete, eliminates hassles of having your kitchen out of commission. All the fabrication and other processes are completed before installation. The disadvantage are more seams and the potential for an imperfect fit that must be adjusted.

Talk with your contactor about the best method based on the design and installation factors for your project.

Here are time schedules for both approaches.

Pre-cast countertops:

  • 1 hour or less | Remove old counters
  • 1-3 hours | Install a single slab
  • 4-7 hours | Install two or more slabs
  • 6-10 hours | Install kitchen counters and an island or breakfast bar

Cast-in-place countertops:

  • 1 hour or less | Remove an old countertop
  • 2-4 hours | Install frames
  • 2-3 hours | Mix and pour slabs
  • 1-4 hours | Form integrated items and/or embed extras

The concrete must then cure for 10-30 days before additional work.

  • 1-4 hours | Grinding a surface to expose aggregate
  • 3-5 hours | Acid staining
  • 2-6 hours | Polishing and sealing the concrete
Free Concrete Counter Top Cost Quotes

Free Concrete Counter Top Cost Quotes

Concrete counter tops look great as part of a kitchen or bathroom remodeling project, but you might want to do a few other upgrades at the same time. Here are a few related projects you might be planning for, based on new counter tops bring installed.


Are You a Pro Counter Top Installer?

If so, head over to our Costimates Pro’s page, and help us make this page better and more accurate for both our visitors and your future customers.

DIY or Hire a Pro?

Most of the cost of concrete countertops is in the labor required. So, the major DIY risk if it doesn’t work out is wasted time – a lot of it. And roughly $200 to $600 in materials based on the size of the counters.

Basic concrete slabs or cast-in-place counters with a smooth finish can be fabricated successfully by those with concrete experience and the right tools. The more complex the design, fabrication and treatment are, the more it makes sense to hire a concrete countertop contractor.

On balance, we recommend using a professional for the work, especially if you want customized, tightly fitting and beautiful counters.

Free Concrete Counter Top Cost Quotes

Free Concrete Counter Top Cost Quotes

Reviewed and edited by Steve Hansen of Costimates

steve hansen of costimates-sm Steve Hansen, that's me, the Senior Editor of Costimates. (Learn more about myself and our team) I'm an avid home improvement professional with more than 37 years experience working on all types of residential new home building, upfits, repairs and remodeling.

"Like most homeowners, I was frustrated with the lack of quality information available on specific home improvement repairs and renovations. In 2015, Costimates was formed to help homeowners learn as much as possible about various projects and their costs so they could make better financial decisions."